About the product
A pocket doorframe designed for double-leaf sliding doors, where the traditional wooden doorframe is flush with the wall contour and the upper joint between the parts is butt welded.Movement of the leaves can also be synchronized, so both leaves can be opened or closed simultaneously. This pocket doorframe allows installation of a mounting panel doorframe flush with the neighbouring crossbar and is intended for a mounting panel doorframe 15 mm thick. For a masonry crossbar, it is necessary to equip the construction opening with a lintel — the pocket doorframe cannot bear a load. The casing is designed to extend the range of Latente counter-frames for revolving doors.
The Latente Komfort casing is compatible with all makes of door and is for wooden, all-glass, Master, Sting or Idea doors. The entire pocket doorframe is made of quality galvanized sheet metal.
- intended for a crossbar thickness of 125 mm or 150 mm
- use for drywall and masonry crossbar
- optional custom dimensions to passage height of 2700 mm
- maximum weight of each door leaf 90 kg
- high-quality, very quiet travelling mechanism in a special aluminium rail
- removable rail
- adjustable front and rear stop
- a synchronized travelling mechanism is included in the price
- guide pin with precise definition at the centre of the casing
- a switch can be placed on the casing pocket
- lifetime warranty
For extra charge:
- to mount an all-glass door leaf, a Vetro 22 fixture must be ordered
- optional single-side or double-side silent stop
Gallery / inspiration
Technical information
Standard width of passage | 1250 - 2450 mm |
Standard height of passage | 1970 mm and 2100 mm |
Custom passage height | 1980 - 2700 mm |
Minimal thickness of finished crossbar | 125 mm |
Maximum weight of each door leaf | 120 kg |
External thickness of casing | 100 mm |
Maximum thickness of door leaf for outer casing dimension 100 mm | 68 mm |
Manuals, certificates
Video montážní návody
Materials
- galvanized sheet metal
- aluminium rail
Painting
- not painted