About the product
It has internal cable ducts that prevent possible collision of the electrical installation with the door leaf. The maximum depth of the wiring box is a generous 45 mm. The Elektra pocket doorframe is intended for wooden or all-glass doors from any door producer. Our own MASTER DOOR and IDEA DOOR are also suitable. For standard passage heights of 1970 mm and 2100 mm, we produce casings by a unique wedging method, and for custom passage heights we deliver a welded pocket doorframe. For a masonry partition, it is necessary to equip the construction opening with a lintel — the pocket doorframe cannot bear a load. The whole frame is made of high-quality galvanized sheet metal.
- intended for a partition thickness of 150 mm
- use for drywall and masonry partitions
- optional custom dimensions to passage height of 2700 mm
- maximum weight of each door leaf 120 kg
- high-quality, very quiet travelling mechanism in a special aluminium rail
- removable upper rails
- adjustable front stop (rear stop is installed during production)
- guide pin with precise delimitation to the centre of the casing
- a switch can be placed on the casing pocket
- travelling mechanisms and fixtures for wooden doors are part of the casing
- lifetime warranty
At extra charge:
damping stop available at additional charge. To damp both sides, two single-sided damping systems must be used.
Gallery / inspiration
Technical information
Standard width of passage | 1250 - 2450 mm |
Standard height of passage | 1970 - 2100 mm |
Custom passage height | 1980 - 2700 mm |
Minimal thickness of finished crossbar | 150 mm |
Maximum weight of each door leaf | 120 kg |
External thickness of casing | 125 mm |
Manuals, certificates
Video montážní návody
Materials
- galvanized sheet metal
- aluminium profile
- aluminium rail
Painting
- not painted